Polymaker LW-PLA 3D Printing Filament 1.75mm, 0.8kg, Grey
15 sold in last 24 hours
- PRE-FOAMED PLA FILAMENT: Typical density is 0.9 g/cm3. Its lightweight structure forms before printing, so it does not rely on in-nozzle expansion like active-foaming filaments
- RC AIRCRAFT APPLICATIONS: Print wings, airframes and other parts where weight matters. The matte surface softens layer lines; final part weight also depends on walls, infill and geometry
- TDS STARTING SETTINGS: With a 0.4mm nozzle, use 190-210°C nozzle, 25-60°C bed and 50-100mm/s speed. Turn the part-cooling fan on; an enclosed chamber is not required
- TUNE FOR YOUR PRINTER: Test a small part first. If you see stringing or poor first-layer adhesion, adjust temperature, retraction and bed setup. TDS retraction guidance: 3-6mm at 40-60mm/s.
- POLYMAKER LW-PLA 0.8KG SPOOL: Net filament weight is 0.8kg. Store dry; if moisture affects printing, the TDS recommends drying at 55°C for 6 hours. Check spool clearance in multi-material feeders
Tags |
Estimated shipping
Select a product to estimate shipping.Perfect for RC planes and drones without compromising strength.
Reduce part weight by up to 50% while maintaining exceptional detail.
Enjoy easy PLA printability with the added benefits of reduced weight and stiffness.
Ideal for lightweight applications with unmatched dimensional stability.
Our material is pre-foamed, ensuring a smooth printing experience with no active foaming during the process. Say goodbye to the complications of traditional lightweight PLA and hello to consistent, reliable results.
Product details
| Main Specification | |
|---|---|
| Manufacturer | Polymaker |
| Unit Count | 28.22 Ounce |
| Brand | Polymaker |
| Number of Items | 1 |
| Included Components | Polymaker PolyLite LW-PLA - 1.75mm - 800g - Grey |
| Item Diameter | 1.75 Millimeters |
| Colour | Grey |
| Global Trade Identification Number | 06938936710295 |
| Item Weight | 0.8 kg |
| Product information | |
| Number of Packs | 1 |
| Technical Details | |
| Manufacturer Part Number | PA08003 |
| Material Type | Polylactic Acid |
| Item details | |
| Model Number | PA08003 |
| Features & Specs | |
| Additional Features | Foaming process for reduced weight |
| Others | |
| Product Type | 3D Printing Filament |
| Item Highlight | Pre-foamed lightweight PLA with 0.9 g/cm3 density and matte finish for RC aircraft parts and weight-sensitive prints |