Sovol Filament Dryer 2026, SH01 Filament Dehydrator 3D Printer Spool Holder
6 sold in last 24 hours
- 【Remove Excess Moisture】3D printer filaments are hygroscopic, moisture would cause printing failure. Sovol SH01, a great addition to 3d printer, can remove excess moisture, keep your filament dry and bring you better prints. The surface of prints will be smoother, the layer adhesion increased. No more brittle PLA, PETG, ABS filament
- 【Real-time Monitoring of Temp and Humidity inside】Displays the humidity and temperature in the dry box in real time. Setting temperature 40 °, 45 °, 50 ° C and setting time from 6 hours to 12 hours. If you use SH01 in a room with room temperature under 16°C, the temperature in the dryer box would not come up to 50°C. But do not worry, this would not decrease drying effect
- 【Excellent Power-off Drying Mode】Silicone & PTFE seal makes it possible to store filaments for a long time without power and protects your filaments from moisture and dirt. You can put 4 bags of desiccants (not included in the package) inside the dryer box to improve drying efficience & quality
- 【Large Capacity】 Sovol dryer box can store 2 filament rolls with a width of less than 70 mm or 1 filament roll with a width of less than 150 mm. Please open the PTFE seals on the top of the box during heating for Moisture evaporation
- 【Heating More Evenly】 The unique design of the built-in fan in the box is based on the principle of modynamics of air, makes the filament heated more evenly. SH01 makes drying more efficient. Any questions about the product please feel free to let us know. Our technical support team will provide service as soon as we can
Tags |
Estimated shipping
Select a product to estimate shipping.Evenly distributed heating ports.
Enough space for 2 rolls filament.
Built-in fan makes heating more evenly.
Two locking clips can lock the lid very tight and won't pop up the lip.
Please open the PTFE plugs on the top of the box during heating for Moisture evaporation.
Please put the filament rolls inside in this way to make the filament goes out more smoothly.
How to place the filament into SH01?
Place the filament into the filament outlet. Please note that the direction is placed counterclockwise so that the pulley at the bottom can feed better.
What can you do if you have E0 or E1 error?
If the screen displays E0 or E1, please open the drying box and check all the cable sockets on the motherboard to see if they are damaged or loose. If there is any problem, please feel free to let us know. We will send replacement for you.
Compared to common PLA filamemt, is there anything need to know when you dry silk filament with SH01?
Drying silk filaments at too high temperature will make them to melt and stick together. The recommended drying temperature is 45 degrees Celsius for 2 hours.
Product details
| Main Specification | |
|---|---|
| Material | Polylactic Acid or Polyethylene Terephthalate Glycol or Polytetrafluoroethylene or Thermoplastic Polyurethane See more |
| Manufacturer | Sovol |
| Unit Count | 1 Count |
| Brand | Sovol |
| Number of Items | 1 |
| Item Diameter | 2.85 millimeters |
| Colour | White |
| Item Weight | 1.4 kg |
| Product information | |
| Number of Packs | 1 |
| Technical Details | |
| Material Type | Polylactic Acid or Polytetrafluoroethylene or Thermoplastic Polyurethane or Polyethylene Terephthalate Glycol |
| Manufacturer Part Number | / |
| Item details | |
| Model Number | SV-SH01-1 |
| Features & Specs | |
| Additional Features | Even heating with built-in fan for efficient drying |
| Others | |
| Item Highlight | with Upgraded Fan or Dry Box for Keeping Filament Dry or Compatible with 1.75mm or 2.85mm PLA PETG TPU ABS |
| Product Type | 3D Printing Filament |