Square D 135-175 PSI Air Compressor Pressure Switch, Pumptrol, Hinge Lever Actuator, Grey, Manual Operation
8 sold in last 24 hours
- Brand new Square D brand, Pumptrol air compressor pressure switch, model: 9013FHG42J59M1X 135-175 PSI with unloader control valve and On / Off switch.
- This pressure switch is designed for a 2 stage air compressor pumping up to 175 PSI but can be adjusted anywhere from 100-200 PSI.
- Model: 9013FHG42J59M1X Number of Pressure Sensing Connection Ports: One 1/4" Female NPT (Note: 1/4" NPT Measures About 1/2" In Diameter)
- Unloader Connection Port: 1/4" Compression Which Accepts 1/4" Outside Diameter Copper Or High Pressure Tubing
- Preset On Pressure: 135 PSI Preset Off Pressure:175 PSI Differential: 40PSI Can Be Used With Single Or Three Phase
Estimated shipping
Select a product to estimate shipping.Brand new Square D brand, Pumptrol air compressor pressure switch, model: 9013FHG42J59M1X 135-175 PSI with unloader control valve and On / Off switch. This pressure switch is designed for a 2 stage air compressor pumping up to 175 PSI but can be adjusted anywhere from 100-200 PSI. This switch features a built in On / Off metal lever and also a unloader located on the bottom of the switch. The unloader is used to unload head pressure off the compressor pump for a load free start up. If your compressor does not require a unloader valve on the pressure switch you can leave it not hooked up and the switch will still function properly. This is an authentic Square D brand pressure switch, for more specifications see below. Specifications: Brand: Square D Pumptrol Model: 9013FHG42J59M1X Number of Pressure Sensing Connection Ports: One 1/4" Female NPT (Note: 1/4" NPT Measures About 1/2" In Diameter) Unloader Connection Port: 1/4" Compression Which Accepts 1/4" Outside Diameter Copper Or High Pressure Tubing Preset On Pressure: 135 PSI Preset Off Pressure:175 PSI Differential: 40PSI Can Be Used With Single Or Three Phase Can Be Used With 110 - 575 Volts Depending On Amperage And Phase Good Up To 15 Amps Of Continuous Current. (Note: If being used with a magnetic starter the amperage does not matter since all the main power is going through the starter not the pressure switch.)
| Main Specification | |
|---|---|
| Connector Type | Npt or Compression |
| Manufacturer | Square D |
| Unit Count | 1 Count |
| Control Method | Touch |
| Specification Met | Culus |
| Controller Type | Push Button |
| Contact Material | Stainless Steel |
| Contact Type | Normally Open |
| Current Rating | 15 A |
| Operating Voltage | 110 Volts |
| Terminal | Screw |
| Circuit Type | 2-Way |
| Actuator Type | Hinge Lever |
| Brand | I.E.E |
| UPC | 724453991844 |
| Control Type | Manual |
| Number of Items | 1 |
| Operation Mode | Manual |
| Compatible Devices | 2-stage air compressors (100-200 PSI) |
| Wattage | 8625 watts |
| Material | Metal |
| Colour | Grey |
| Mounting Type | Panel Mount |
| Product information | |
| Switch Type | Pressure Switch |
| Technical Details | |
| Part Number | LF10-L4 |
| Model | LF10-L4 |
| Material Type | Metal |
| International Protection Rating | Ip54 |
| Number of Positions | 2 |
| Connectivity Protocol | X-10 |
| Others | |
| Product Type | Air Compressor Replacement Parts |