AKEOIL Sheet Metal Cutter Drill Attachment, Electric Drill Plate Cutter and Metal Cutting Tool Adapter for Thin Iron, Steel, Aluminum and Copper
7 sold in last 24 hours
- 1.· (DRILL-POWERED SHEET METAL CUTTER) Converts a compatible electric drill into a powered cutter for trimming thin, flat sheet metal. Suitable for straight, curved and custom cuts during DIY and repair projects.
- 2.· ( CHECK MATERIAL THICKNESS FIRST) Designed for thin iron, steel, aluminum and copper sheets within the stated cutting limits. Not intended for thick plate, hardened steel, welded seams or structural metal.
- 3.· (CONTROLLED CUTTING PERFORMANCE) The geared cutting head provides continuous cutting with less hand effort than traditional snips. For best results, keep the tool flat, use steady drill speed and avoid forcing the cutter.
- 4.【RECOMMENDED CUTTING THICKNESSES FOR VARIOUS MATERIALS ARE AS FOLLOWS】: Iron plate 0.3-1mm, Iron sheet 0.3-1.2mm, Steel plate 0.8-1mm, Copper plate 1.5mm and Aluminum 1.5mm With these precise cutting capabilities, you can achieve the desired results for your projects.
- 5.· ( FITS MOST STANDARD DRILLS) Compatible with most corded and cordless drills using a 3/8-inch chuck. Secure the shaft and stabilizer before use and verify that all components are firmly tightened.
- 6.· (FOR GARAGE AND DIY PROJECTS) Useful for flat roofing sheet, metal panels, workshop fabrication, auto-body patches, appliance panels and general sheet-metal trimming. Drill is not included.
Tags |
Estimated shipping
Select a product to estimate shipping.Sheet metal cutting machine, electric drill shears, for copper, iron, aluminum plate fast cutting, efficient, time-saving and labor-saving
Sheet metal cutting machine, electric drill shearer, used for copper, iron, aluminum plate fast cutting, high efficiency, time and energy saving, compared with the traditional shearer, the new section adopts a one-piece casting process, to prevent the dust in the working process with the intervention of the crushed foam, to increase the stability of the shearer, the cutting part of the use of high-strength, high-hardness titanium to ensure that in the process of cutting the smooth fluency, the transmission part of the transmission has also done a great deal of innovation, compared to the traditional gears, but also more than the bearing drive, the gears with the bearing of the combination of the drive efficiency increases, so that the shear process is smoother smooth!
This drill shearer is suitable for most of the lithium drills in the market, easy to operate, and can be supported by fixed clamps or cranks.
This electric drill shearer, adapt to the market most of the lithium drill, easy to operate, can be used to support the work of fixed clamps, can also be used to support the work of the crank, the big innovation, we are both the structure and materials have made improvements, just to give you a different work experience.
The combination of this wheel and bearings makes it easy to operate, even for female practitioners.
The combination of this wheel plus bearings will not feel laborious even if it is operated by a female practitioner, one-piece casting, precision bonding, reduces lagging, in case there is lagging, just back up directly, the gear part is made of titanium steel, cutting without sparks and burrs. Thickened fixed spring card tighter, cut more stable,,, integrated all-metal, wear-resistant, waterproof and rust-proof, the
Electric drill steel plate cutter adopts physical disc cutting, smooth use without jamming, no sharp mouth safer
Electric drill steel plate cutter adopts physical disc cutting, smooth use without jamming, no sharp mouth safer, the combination of gears and bearings, smoothness increased by 30%, (data from AKEOIL product development laboratory), cutting surface edge flat, flatness increased by 50%!
Main specification parameters
Shear thickness values for different materials
Iron plate 0.2-1MM
Iron sheet 0.3-1.2MM
Copper plate 0.3-1.2MM
Aluminum plate 0.3-1.2MM
Steel plate 0.2-0.8MM
Stainless steel 0.2 - 0.5MM
Product details
| Main Specification | |
|---|---|
| Included Components | 6-angle + Phillips Wrenches or Crank holder or Shear master or Straight Handle Holder |
| Manufacturer | Shenzhen Xingyacai Electronic Technology Co. |
| Brand | Akeoil |
| Item Package Quantity | 1 |
| Power Source | Ac_dc |
| Product Dimensions | 9 x 3.7 x 1.96 inches |
| Item Weight | 15.4 ounces |
| Product information | |
| Item model number | XYC-10 |
| Technical Details | |
| Part Number | XYC-10 |
| Others | |
| Date First Available | 2023 or October 17 |
| Product Type | Nibblers |