Rainbow Glow in Dark PLA 1.75mm 250g Spool Bright Luminou 3D Print Filament
13 sold in last 24 hours
- 【Glow in the Dark】Luminous rainbow in darkness while white itself in brightness. Contains phosphorescent materials that glow in the dark after absorbing light energy. The glowing effect will be stronger under Sun light or UV light source after 30 miniutes. Hassle-Free printing friendly with beginner. Please note!! No recommend to use it in AMS
- 【Recommend Settings】We recommend printing this glow in the dark filament at nozzle temperature of 220°C - 230°C , bed temperature of 60°C, and printing speed of 30-200mm/s. (The brittleness in the unprinted state is due to the addition of more luminescent powder, not a quality issue). Please noted!! This is rainbow gradient filament. If the total weight of prints is insufficient, it may cause the prints to only display single color
- 【Neatly Wound & High Precision】Toksen3D PLA filaments keeping perfectly and neatly wound. The diameter tolerance of the PLA rods is 1.75mm +/-0.03mm! Non-turnover characteristics achieve certain output quality and stable printing. Bringing higher precision printing experience
- 【No Tangles & No Clogging】Length: 80±5m; Tight tolerances, No overlap and No tangle, 0.25KG High Speed Fast 3D printer Filament makes 3D printer molding effect good and smooth. Smallest dimensional tolerance provide smooth and continuous supply
- 【Premium Material】Toksen3D PLA Filament is made of Premium Material. It is odorless, no jamming, no bubble, no tangle, and no layer line. Good melting adapt to high speed printing for 3D print farms, using Bambu Lab 300mm/s printing speed and perform perfectly, the prints as the pictures show
- 【Wide Compatibility】Toksen3D PLA+ Filaments is universal 1.75mm, compatible with FDM 3D printers. Such as: Prusa, Reprap, Bambu Lab A1 P1S X1C H2D H2C, Ender K1 K2, Flsun, Afinia, MakerBot, UltiMaker, Airwolf, Aleph Objects, Makergear, Up, Lulzbot, Simplify3D, Flashforge, Snapmaker, etc. Uniform color printing of items with beautiful colors
- 【Light Up Holidays】More Than Just Decor – A Mood Maker. It is born for romance and celebration. From Easter eggs, subtle home accents to sweet Valentine's Day gifts, playful Halloween props, heartfelt Thanksgiving table decor, and exciting New Year's Eve party favors – this one spool turns your 3D printer into a true holiday magic maker
Tags |
Estimated shipping
Select a product to estimate shipping.Why doesn't my 3D print glow in the dark?
This glow filament needs to absorb light energy first. Best sources: UV lamp or sunlight. Regular LED or fluorescent lights won't charge it properly, so your print may not glow or only glows very weakly. Use a UV/blacklight for the best effect
How to make this glow in the dark PLA filament adhere to the heat bed
If printing fails, please use cold board or spray glue, it's the most effective way. Due to the addition of more luminous powder, the adhesion performance of filament has been weakened, Toksen3D Team has optimized the formula and achieved balance
Why did my 3D print turn into spaghetti or fall off the bed?
Print detached from bed mid-print→nozzle moves in air creating spaghetti or failure Fix: glue stick or hairspray on bed Raise bed temp (PLA60°C) and nozzle temp (220-235°C) Ensure first layer squished (adjust z-offset) This stops detachment spaghetti
My filament snaps easily when bent. Is it defective? Can I use it in AMS?
Not defective. More glow powder gives better glow but lower filament flexibility. But print fine, and finished prints are as hard as regular PLA. Avoid AMS – repeated bending may snap filament. Toksen3D had optimized formula in May filament batch
Why does my glow-in-the-dark print glow for only a short time?
Green & blue glow the longest and brightest. Other colors are weaker. Print thickness and weight matter – more filament used, longer glow. Light source & charging time also affect. UV/sunlight, charge fully, print more wall for better results
Product details
| Main Specification | |
|---|---|
| Manufacturer | Toksen3D |
| Unit Count | 35.27 Ounce |
| Brand | Toksen3D |
| Number of Items | 1 |
| Item Diameter | 1.75 Millimeters |
| Material | Polylactic Acid |
| Colour | 250g Pla-yg-04 Glow Rainbow |
| Item Weight | 8.8 Ounces |
| Product information | |
| Number of Packs | 1 |
| Technical Details | |
| Manufacturer Part Number | PLA-YG-004 250g |
| Material Type | Polylactic Acid |
| Features & Specs | |
| Additional Features | Glow in the Dark or Small spool or Vibrant Gradient Colors |
| Others | |
| Product Type | 3D Printing Filament |
| Item Highlight | Rainbow Gradient Vibrant bright color change Hide layers Low warping 0.25kg Small spool for Printer Bambu Flashforge |