跳至内容
9/16-20 右手和左手牵引带 HSS 9/16' - 20 TPI

Price:

$ 28.03


9/16-20 右手和左手牵引带 HSS 9/16' - 20 TPI

https://m.media-amazon.com/images/I/51oyv-N7SEL.jpg
14 sold in last 24 hours
  • Thread Type: Right & Left Hand Thread
  • 规格:直径(D):9/16',每英寸线条(TPI):20,皮奇(P):1.270毫米,笛子类型:直笛,线条类型:UN
  • Fit/Style:本产品为钢铁,铁,铝,铜等各种金属的机械加工和加工设计. 它通常用于线程修理以及其他一般的机械和维修操作。 请注意: 这种水龙头装置不建议用于钛、硬化钢或可能需要专门切割工具的异国合金。
  • 9/16"-20 线程Tap:确保它是你材料的正确类型(如金属高速钢).
  • 要安装9/16"-20水龙头线,必须先钻出正确的飞行员孔,保证材料安全,然后按照特定的旋转和润滑程序小心地转动水龙头.

$ 28.03 28.03 USD $ 28.03

Not Available For Sale

($ 28.03 / Units)
9 people are viewing this right now

  • 制造商
  • 品牌
  • 项目包数量
  • 材料
  • 项目重量
  • 软件包尺寸
  • 编 号
  • 计量系统
  • 产品类型
  • 第一次可用日期

此组合不存在。

手串磁带

条款和条件
30天退款保证
运输:2-3 个工作日

Estimated shipping
Select a product to estimate shipping.

Fit/Style: This product is designed for the machining and processing of various metals, including steel, iron, aluminum, and copper. It is commonly employed in thread repair, as well as other general machining and maintenance operation. Please note: This tap set is NOT recommended for use on titanium, hardened steel, or exotic alloys which may require specialized cutting tools.
Quantity: 2
Thread Type: Right & Left Hand Thread
Model: 9/16'' - 20 TPI
Material: HSS

Specification:
Thread diameter (D): 9/16''
Threads per inch (TPI): 20
Pitch (P): 1.270mm
Flute type: Straight flute
Thread type: UN

To install a 9/16"-20 tap thread, you must first drill the correct pilot hole, secure the material, and then carefully turn the tap, following specific rotation and lubrication procedures.

Required Tools and Materials
9/16"-20 Thread Tap: Ensure it is the correct type for your material (e.g., high-speed steel for metal).
Tap Wrench or Tap Handle: A tool with a square drive to turn the tap by hand. (Power tools are generally not recommended for hand taps).

Drill Bit: The correct size for the pilot hole (use a tap and drill chart for specific size, as it depends on thread standard, but commonly around 33/64" for similar threads).

Drill: To make the pilot hole. Cutting Oil/Coolant: Essential for cooling and lubrication to prevent tap loss and ensure clean threads. Vise or Clamps: To secure the workpiece firmly. Safety Gear: Safety glasses and gloves.

Step-by-Step Installation Instructions
1.Prepare the Hole:
Secure your material in a vise or with clamps.
Drill a pilot hole using the appropriate size drill bit. The diameter of the hole must match the tap specifications; refer to a tap and drill chart to find the exact requirement for a 9/16"-20 thread. Align the Tap:

2.Insert the tap into the tap wrench.
Place the tap into the pre-drilled hole, ensuring it is perfectly centered and aligned straight with the hole to avoid creating uneven threads or breaking the tool.

3.Cut the Threads:
Apply cutting oil or coolant to the tap and the hole before you begin.
Gently turn the tap clockwise for two complete rotations to start cutting the threads.
After the two clockwise turns, rotate the tap approximately a half-turn counter-clockwise. This reverse motion helps to break the chips and clear them from the flutes, preventing jamming. Repeat this process—two turns clockwise, half a turn counter-clockwise—until the desired thread depth is reached.

4.Finish the Job:
Do not force the tap; proceed slowly, especially in harder materials.
Once threading is complete, carefully unthread the tap counter-clockwise out of the hole.
Clean the new threads and the tap to remove all chips and apply anti-rust oil to the tap for maintenance after use.

Main Specification
制造商 摩托库
品牌 摩托库
项目包数量 页:1
材料 医务科
项目重量 0.01 盎司(盎司)
Product information
软件包尺寸 4.7 x 2.9 x 1.6英寸 宽
Technical Details
编 号 749029997297 (英语).
计量系统 帝国
Others
第一次可用日期 2019 (英语). or 7月26日,日内瓦
产品类型 手串磁带