跳至内容
Sworker 5Pcs Long Carbide Burr Set 1/4" Shank Total L 6.2" Die Grinder Bits Rotary Rasp Attachment Cut Port Grind Metal Cast Iron Steel Aluminum Cylinder Head Engine Intake Exhaust Manifold Tight Area

Price:

$ 40.41


Sworker 5Pcs Long Carbide Burr Set 1/4" Shank Total L 6.2" Die Grinder Bits Rotary Rasp Attachment Cut Port Grind Metal Cast Iron Steel Aluminum Cylinder Head Engine Intake Exhaust Manifold Tight Area

https://m.media-amazon.com/images/I/61CLf9XgU7L.jpg
10 sold in last 24 hours
  • 5 Pcs long carbide burr set 1/4" shank total length 6.22", head dia 8mm and 10mm, 1 slotted plastic box with hanger and 1 manual.
  • Bent Risk! The tungsten carbide burr bits must remain in contact with the workpiece as long as the tool is running or turning on or turning off moment. Failure to observe this procedure may result in burr shank bending and an increased injuries risk. If the continuous contact between the bits and the workpiece is not guaranteed, the max idling speeds should not be exceeded.
  • Perfect for tight and hard-to-reach areas than grinding discs grind wheel. Double cut produces a finer finish than single cut and reduces the size of the chips.
  • Long shank carbide burrs bits perfect for deburring smoothing grinding porting cast iron steel aluminum cylinder head engine intake exhaust manifold.
  • Very sharp, aggressive, tough, well-balanced and durable. 5 years returnless replacement.

$ 40.41 40.41 USD $ 40.41

Not Available For Sale

($ 40.41 / Units)
6 people are viewing this right now

  • 制造商
  • 图案
  • 品牌
  • 形状
  • 项目包数量
  • 包含的组成部分
  • 电源
  • 产品尺寸
  • 材料
  • 颜色
  • 大小
  • 样式
  • 项目重量
  • 项目型号
  • 速度
  • 编 号
  • 完成
  • 安装方法
  • 块数
  • 特殊特性
  • 使用量
  • 计量系统
  • 产品类型
  • 第一次可用日期

此组合不存在。

扶轮工具辅助工具

条款和条件
30天退款保证
运输:2-3 个工作日

Estimated shipping
Select a product to estimate shipping.

Sworker 5 Pcs Long Shank Carbide Burrs Shank Dia.=1/4", Head Dia.=8mm to 10mm, Total L. 6.22", 1 Clamshell Plastic Box with Hook and 1 Manual.

1. In general, burrs are used counter-rotationally or with a swinging motion. Pass the tool rapidly and lightly over the workpiece in the direction of rotation to achieve fine finishes and chamfers.

2. Don't apply too much pressure on the rotary tool, multiple light passes are better than a single deep one. Let the speed do the work. Do not exceed the max idling and application speed.

3. Clamping more shank depth of the burrs bits, inserting the shank of bits to the bottom of clamping is optimal. If you have to clamp the less shank, please low the rotary tool rotation speed.

4. Use only 1/4" rigid clamp system(collect and nut). Not be used for 6mm collect and nut of rotary tools. The high-speed rotary tools are optimal.

5. Don't sink the carbide burr for more than 1/3 of its periphery. Recommendation for tools drives: 1/4" shank from 300W, for coarse cuts, 500W+ and short shank burrs are optimal.

6. Avoid impact loads, otherwise the parts teeth will break off, shank will bend. For soft materials, such as aluminum, use a lubricant to reduce debris clogging. Use water as lubricant for glass.

7. Avoid lifting the burr away from the workpiece when starting, operating and stopping the tool, if your rotary tool works at a high speed. Using a foot switch is an excellent solution.

8. Always wear ear, eye, face protection and safety gloves. Grip the rotary tool firmly with both hands and use a swinging motion to minimizes the risk of kickback or wobble or sudden movement.

Notes: Bent Risk

The tungsten carbide burr bits must remain in contact with the workpiece as long as the tool is running or turning on or turning off moment. Failure to observe this procedure may result in burr shank bent and an increased injuries risk. If the continuous contact between the bits and the workpiece is not guaranteed, the max idling speeds should not be exceeded. Max idling speed without contact to workpiece: Head Dia.8mm≤6000RPM, Head Dia.10mm≤4000RPM, Max application speed with contact to workpiece: Head Dia.8mm≤11000RPM, Head Dia.10mm≤9000RPM.

Product details

Sworker Carbide Burrs - 5 Pcs for Metal & Cast Iron -12
Sworker Carbide Burrs - 5 Pcs for Metal & Cast Iron -13
Sworker Carbide Burrs - 5 Pcs for Metal & Cast Iron -14
Sworker Carbide Burrs - 5 Pcs for Metal & Cast Iron -15
Sworker Carbide Burrs - 5 Pcs for Metal & Cast Iron -16
Sworker Carbide Burrs - 5 Pcs for Metal & Cast Iron -17
Sworker Carbide Burrs - 5 Pcs for Metal & Cast Iron -18
Main Specification
形状 球头 or 球鼻圆筒 or 球鼻树 or ball-nosed-cone.
包含的组成部分 5 Pcs long burrs 1/4" shank Tot. L 6.22" or 1 plastic box and 1 manual.
大小 5个pc or 1/4x6.2"Shank
制造商 工人
图案 双切
品牌 工人
项目包数量 页:1
电源 最佳旋转槽工具(高RPM). 低RPM钻孔/钻孔机压力差。
产品尺寸 7.13 x 3.23 x 0.7 inches
材料 头/头部碳化物
颜色 银灰色
样式 双切( 交叉切)
项目重量 8.4盎司(8.4盎司)
Product information
项目型号 5TC635
速度 11000 rpm
Technical Details
使用量 木头 or 剪切 or 磨损 or 偿还 or 形状 or 在金属上移植 or 钢 or 铝 or 石头。 使用研磨机和旋转工具。 金属加工的理想 or 伪造 or 雕刻 or 和工具维护。
编 号 5TC635
完成 无装饰/淡润滑
安装方法 螺旋坚果或3 -jaw Chuck
块数 页:1
特殊特性 容易安装
计量系统 英文/标准
Others
第一次可用日期 2025 (英语). or 6月6日,纽约
产品类型 切割掩体