uxcell 25 牙轮滚筒B型,#25 链,单弦 1/4" Pitch, 8mm Bore Black Oxide C45 碳钢与Set螺丝用于ISO 04C
13 sold in last 24 hours
- 软件包内容: 1 x 链螺旋桨, 2 x 设置螺丝
- 链状螺旋桨通常固定在固定轴上。 2pcs的圆洞 90度的螺丝 竖杆可以修井,方便使用.
- 链状螺旋桨的旋转速度不应超过同样大小的驱动螺旋桨所允许的速度。 每个滚子链的螺旋桨都有坚固的牙齿,可以将它挂在链上. 有建议认为,链状突起物与链状突起物在网状中至少有3个牙齿.
- 产品采用c45碳钢制成,牙部分高温清热处理,高硬度,耐磨,服务寿命长,易用. 全身黑色氧化物涂装,防锈.
- 广泛用于磨机,钻机或其他机械传输场合.
Tags |
Estimated shipping
Select a product to estimate shipping.Features:
1. Chain Sprockets are normally mounted in a fixed position on a fixed shaft. Round hole with 2pcs Set Screws at 90 degrees. The shaft can be fixed well, which is convenient to use.
2. The chain sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain sprocket comes with strong teeth that can latch onto the chain. It is suggested that chain sprockets have at least three teeth in mesh with the chain.
3. The product is made of c45 carbon steel, the tooth part high temperature quenching heat treatment, high hardness, wear resistance, long service life, easy to use. Fully black oxide coated, rust resistance.
4. Widely used in milling machine, drilling machine or other machinery transmission occasions.
Specifications:
Material: C45 carbon steel
Finish: Black Oxide
Number of Teeth: 25
Outside Diameter: 54mm / 2.13-inch
Bump Width: 12mm / 0.47-inch
Total Width: 15mm / 0.59-inch
Bore Diameter: 8mm / 0.31-inch
Pitch: 1/4-inch / 6.35mm
Tooth Width: 2.7mm / 0.11-inch
Set Screw Size: M5
Package Content:
1 x Chain Sprocket
2 x Set Screws
| Main Specification | |
|---|---|
| 制造商 | 电子手机 |
| 品牌 | 电子手机 |
| 项目重量 | 0.01 盎司(盎司) |
| Product information | |
| 软件包尺寸 | 5.47 x 3.98 x 0.67英寸 (中文(简体) ). |
| 项目型号 | a21121100x0398 |
| Others | |
| 第一次可用日期 | 2022 (英语). or 2月12日 (英语). |
| 产品类型 | 滚链螺丝 |















