Polymaker LW-PLA 3D Printing Filament 1.75mm, 0.8kg, Grey
8 sold in last 24 hours
- PRE-FOAMED PLA FILAMENT: Typical density is 0.9 g/cm3. Its lightweight structure forms before printing, so it does not rely on in-nozzle expansion like active-foaming filaments
- RC AIRCRAFT APPLICATIONS: Print wings, airframes and other parts where weight matters. The matte surface softens layer lines; final part weight also depends on walls, infill and geometry
- TDS STARTING SETTINGS: With a 0.4mm nozzle, use 190-210°C nozzle, 25-60°C bed and 50-100mm/s speed. Turn the part-cooling fan on; an enclosed chamber is not required
- TUNE FOR YOUR PRINTER: Test a small part first. If you see stringing or poor first-layer adhesion, adjust temperature, retraction and bed setup. TDS retraction guidance: 3-6mm at 40-60mm/s.
- POLYMAKER LW-PLA 0.8KG SPOOL: Net filament weight is 0.8kg. Store dry; if moisture affects printing, the TDS recommends drying at 55°C for 6 hours. Check spool clearance in multi-material feeders
Tags |
Estimated shipping
Select a product to estimate shipping.Perfect for RC planes and drones without compromising strength.
Reduce part weight by up to 50% while maintaining exceptional detail.
Enjoy easy PLA printability with the added benefits of reduced weight and stiffness.
Ideal for lightweight applications with unmatched dimensional stability.
Our material is pre-foamed, ensuring a smooth printing experience with no active foaming during the process. Say goodbye to the complications of traditional lightweight PLA and hello to consistent, reliable results.
Product details








| Main Specification | |
|---|---|
| 制造商 | Polymaker |
| 单位数 | 28.22 Ounce |
| 品牌 | Polymaker |
| 项目数 | 页:1 |
| 包含的组成部分 | Polymaker PolyLite LW-PLA - 1.75mm - 800g - Grey |
| 直径 | 1.75毫米口径 |
| 颜色 | 灰色 |
| 全球贸易识别号码 | 06938936710295 |
| 项目重量 | 0.8公斤(10公斤) |
| Product information | |
| 包装数量 | 页:1 |
| Technical Details | |
| 制造商部分编号 | PA08003 |
| 材料类型 | 聚酯酸 |
| Item details | |
| 型号 | PA08003 |
| Features & Specs | |
| 其他特征 | Foaming process for reduced weight |
| Others | |
| 产品类型 | 3D 打印文件 |
| 项目重点 | Pre-foamed lightweight PLA with 0.9 g/cm3 density and matte finish for RC aircraft parts and weight-sensitive prints |





